How To Install Newcamd.list
LINK ->>> https://ssurll.com/2t7bwm
I have prepared three ipk files for you for easy installation in a mips box with a VIX image. Just copy the ipk file of the version you want to use to the root directory of the USB Flash or via ftp to the / temp directory and install it.
I have an Amiko Alien 2 box and I'm just getting to grips with it. Now as I'm learning my way around Spark, what I really want to do is use Enigma2. The main reason being for the 7 day EPG on it. Now I've installed a HDMU image from another site (sat something) and I have installed an Mgcamd plugin, which I need as my mate is running on this protocol. But I'll be damned if I can figure out how to enter the server settings? It's relatively straight forward when using Spark, but this Enigma2 is another kettle of fish! All I can seem to do on this is to 'start' it. But obviously without the proper line/info it won't work!
Unfortunately it hasn't worked. I went through some of the menus and on one plugin called 'Softcam plugins' I tried pressing restart!? Still nothing. But I did note that the settings in this bit showed that the keys were stored in var/keys and not usr/keys. So I copied the newcamd.list file to there too. Just in case. lol. (files everywhere, what the hell!)Still hasn't worked.I get the feeling that this set of Oscam files might have something to do with it. But I may be wrong.These files are currently in the var/keys folder...
Firstly, Filezilla. Yes. THAT worked a treat. Thanks. So I created the newcamd.list as you instructed and placed it into the appropriate place on the box. Although I have to say that the 'keys' folder was not there. So I had to create that. Anyway. It didn't work. So I took a look at a plugin I found called 'Oscam setup' or something like that. When I looked into the setup of that plugin I noted that it said that the keys folder was in var/keys not usr/keys. So I copied that newcamd.list to that location too! (files everywhere, what the hell!). That didn't work. THEN, I looked at the files that were already in that folder. Which included a file called 'oscam.server'. I downloaded it to my pc and looked into it. Sure enough I found settings for newcamd. So I removed the examples that were already there, and replaced them with my settings. IT WORKED!!
Now I know that I have got my system running as described before, but on my Spark setup I am running from the mgcamd plugin ONLY. I have disabled all the other emus, including oscam. So how do I run just through mgcamd_1.35 (i.e. like shown in the previous pics). I have noticed that when I try and set up the above to mgcamd_1.35 (even though I have sorted the newcamd.list file out, I get nothing!
During installation I only set up the TV and scanned for the one satellite (leaving my other three that are connected to the other tuner) at 28.2e. So I will be able to see if a channel unscrambles. From the menu I installed only Mgcamd. Nothing else. I then copied over my edited versions of mg_cfg and newcamd.list to the 'Softcam Config Directory' as shown here (Sorry about the reflection of me and the dog! lol)...
How to Install CCcam/MGCamd & other softcam's on ALL ViX supported Enigma 2 ReceiversIn this example im going to show how to Install CCcam 2.2.1 on the ViX ImageYou need access to FTP and CCcam 2.2.1 (or whichever version you prefer) ipk file and your CCcam.cfg file (your details go in here)I use FlashFXP (Filezilla is a great free one too) and below is how I have configured mine, you will need to do the same for yoursYou need your boxs IP Address/Host Name, Username and Pass in order to connect to your boxfxpsite.jpgAs you can see my IP Address/Host Name is xxxxx.dyndns.org or i could have entered 192.168.x.12my username is root (that is default)my password is xxxxxxxxx (default password is blank or password or dreambox)once you have saved and connected to the box you should get access to the root of your box and should look like the right hand window of the below screenshotfxpftp.jpgDownload your Cam from HERE or mirror below.Im after CCcam 2.2.1 which is enigma2-plugin-cams-cccam.2.2.1_1.0-r0_mipselOnce downloaded you need to transfer the enigma2-plugin-cams-cccam.2.2.1_1.0-r0_mipsel.ipk file into the /tmp folder on the box like belowcam.jpgThen transfer your CCcam.cfg file into the /etc/ folderetc.jpgnow go to your box and press Menu > Setup > VIX or Blue Button > Install Local Extension and you should have enigma2-plugin-cams-cccam.2.2.1_1.0-r0_mipsel.ipk file in there1.jpgPress 'Green' button to install and once completed it will ask for a 'Gui Restart'. Press OK and wait for box to come back onOnce the box is on press Menu/Setup/Softcam / CI/Softcam Manager and in there if you have done everything correctly you should see CCcam 2.2.12.jpgPress 'Green' to start CCcam 2.2.1 and it should now be active like below3.jpgFinally Press 'Blue' to enable Auto Start and you are now ready and setup with CCcam 2.2.14.jpgHope you guys find this tutorial helpful any questions dont hesitate to ask in here After flashing your Dreambox with the Gemini image, you will discover that it doesn't contain CCcam yet. This howto describes what steps you need to take to install CCcam onto your Dreambox with Gemini. Installing Newcamd EMU into Dreambox 500 Would appreciate if someone could advice the options or steps to load this emulator into my Dreambox 500s. One unit has a Gemini 3.6 image (already has CCcam) the other unit has a PLi Diamond image.
If you are successfully able to install through the above procedure than it is the complied channel list, which is the root cause of the problem. On the contrary, if the problem persists, try checking your USB port. 2b1af7f3a8